- Made from Zintec steel sheet with a light grey textured polyester powder coated finish.
- Choose between punched or solid (blank) options.
- Approximate fitting time 15-20 minutes.
- Please follow our fitting instructions & take safety precautions as necessary.
Tools required: Electric drill / cross head screw driver / 3.2mm drill bit / pliers.
Fitting instructions: If your grilles have bendable tabs use the pliers to bend the tabs (only enough to fit the bodywork). Then carefully drill into the bodywork through one of the tabs and fix with a self tapping screw supplied. Then press the grille close to the glass and drill the rest of the holes and fit the remaining screws.
Please note: The image shows both the solid and punched rear window grilles/blanks. Do not bend the tabs the wrong way as they may break off when bending back the correct way. Always wear safety glasses when drilling. Always be aware of wiring looms etc when drilling. Whilst every effort has been made to ensure all of our products can be safely fitted, if products require the vehicle to be drilled we cannot accept any liability for any damaged caused by the fitting of our products.
Product codes VG224, VG227, VG19 & VG216 fit vehicles with tailgates.
Product codes VG214/DD & VG214/SD fit vehicles with side windows.
All other product codes fit vehicles with rear windows/doors.
THE IMAGE TO THE RIGHT IS FOR DISPLAY PURPOSES ONLY AND IS NOT NECESSARILY THE CORRECT ONE FOR YOUR VAN. PLEASE TAKE CARE TO SELECT THE CORRECT MODEL FROM THE LIST BELOW. IF YOU ARE IN DOUBT PLEASE CONTACT US BY PHONE ON 01778 561900 OR EMAIL US BEFORE PLACING YOUR ORDER.
